48
Intermec EasyCoder 201 II – Technical Manual
THERMAL PAPER, cont'd.
Additional Setup Options
Additional setup options are included in the “Paper Type” stack of
menus for compatibility reasons.
6 dots/mm printers:
KANZAKI 86S, RICOH 120 LAB/LAM, RICOH 130 LAB/LAM
8 dots/mm printers:
KANZAKI 86S, RICOH 120 LAB/LAM, RICOH 130 LAB/LAM
BT APPLETO T0970, BT KANZAKI 3009J, BT OJI LYC630100,
BTP RICOH 120LCS, BT2 RICOH 120LCS
“Paper Type” options starting with “BT”, “BTP”, pr “BT2” are
optimized for bag-tag printing. However, the standard settings may
also work well for bag-tag printing.
The presence of the settings listed on this page must not be
understood as approvals of papers with the said designations.
To Next Page
Loading...
