10
Intermec EasyCoder 201 II – Technical Manual
The EasyCoder 201 IISA (Stand-Alone) printer is intended for applications, where the printer must be able
to operate without being connected to a computer. The operator can enter variable information into
preprogrammed label layouts and control the printing from the printer's own keyboard or from an external
alphanumeric keyboard. Thus, this printer is fitted with special software in its configuration EPROM's and
an expanded RAM memory. The printer can be temporarily or permanently connected to a PC for up- or
downloading of label texts and formats. The EasyCoder 201 IISA is available with 6 dots/mm printhead
density for EAN/UPC bar code printing, or 8 dots/mm for high quality printing of text, bar codes and
images. The software is described in a separate manual.
MODELS, cont'd. EasyCoder 201 IISA
To Next Page
Loading...
