Intermec EasyCoder 201 II - Self-Adhesive Strip; Technical Manual

52
Intermec EasyCoder 201 II – Technical Manual
NORMAL ROLL PRINTERS:
← a → Web width (incl. backing paper):
Maximum .................................................. : 89.0 mm (3.50")
Minimum .................................................. : 40.0 mm (1.58")
← b → Paper width (excl. backing paper):
Maximum .................................................. : 87.4 mm (3.44")
Minimum .................................................. : 38.4 mm (1.51")
← c → Backing paper:
The backing paper must not extend more than 1.6 mm (0.06") outside the
paper and should protrude equally on both sides.
“BIG ROLL” PRINTERS (7" internal roll):
← a → Web width (incl. backing paper):
Maximum .................................................. : 80.2 mm (3.16")
Minimum .................................................. : 40.0 mm (1.58")
← b → Paper width (excl. backing paper):
Maximum .................................................. : 78.6 mm (3.10")
Minimum .................................................. : 38.4 mm (1.51")
← c → Backing paper:
The backing paper must not extend more than 1.6 mm (0.06") outside the
paper and should protrude equally on both sides.
PAPER DIMENSIONS, cont'd.
b
a
SELF-ADHESIVE
STRIP
c c
Self-adhesive Strip