EasyManuals Logo

Intermec PC43d User Manual

Intermec PC43d
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Before You Begin
PC23 and PC43 Desktop Printer User Manual xi
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Information
Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can
be damaged if you do not follow the safety warnings and cautions.
This section explains how to identify and understand warnings,
cautions, and notes that are in this document.
Safety Precautions
Read and review this manual carefully before connecting the
printer.
Because moving parts are exposed when the cover is open, ensure
that the cover is closed before you operate the printer.
Do not put your fingers inside the print mechanism when the
power is on.
Place the printer on an even surface which can safely support its
weight and supplies.
Warning: A warning alerts you of an operating procedure,
practice, condition, or statement that must be strictly observed to
avoid death or serious injury to the persons working on the
equipment.
Caution: A caution alerts you to an operating procedure, practice,
condition, or statement that must be strictly observed to prevent
equipment damage or destruction, or corruption or loss of data.
Note: Notes either provide extra information about a topic or contain
special instructions for handling a particular condition or set of
circumstances.

Table of Contents

Other manuals for Intermec PC43d

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec PC43d and is the answer not in the manual?

Intermec PC43d Specifications

General IconGeneral
Print TechnologyDirect Thermal
Print Resolution203 dpi (8 dots/mm)
Max Print Width4.1 inches
Max Print Speed8 ips
ConnectivityUSB, Serial, Ethernet
Media Handlingfanfold
Memory128 MB Flash, 64 MB SDRAM
Media TypeTags
Roll Maximum Outer Diameter5 inches
Core Diameter1 inch (25.4 mm) or 1.5 inches (38.1 mm)
Operating Temperature+5°C to +40°C (+41°F to +104°F)
Storage Temperature-20°C to +60°C (-4°F to +140°F)
Humidity10 to 90% RH non-condensing
Power Requirements100-240V AC, 50-60 Hz

Related product manuals