Chapter 1 — About the Printers
26 PC23 and PC43 Desktop Printer User Manual
Printer Options and Accessories
Note: Some printer configurations do not support all accessories. For
more information, contact your local Intermec representative.
Printer Options and Accessories
Accessory Description
300-dpi Printhead Replaces the standard 203-dpi printhead.
USB-to-Serial Adapter USB to RS-232 adapter. Connects to
printer USB Host port and provides serial
connectivity to a PC.
USB-to-Parallel Adapter USB to IEEE 1284 adapter. Connects to
printer USB Host port and provides
DB25 connectivity to a PC or other
equipment.
Ethernet Module RJ-45 adapter installs on back panel of
printer and provides IEEE 802.3 Ethernet
connection. Supports 10BaseT and
100BaseTx. Ethernet and
Wi-Fi/Bluetooth modules can be
installed at same time.
Wi-Fi/Bluetooth Module Radio module can be installed in all
printers and provides Wi-Fi and
Bluetooth connectivity. Wi-Fi/Bluetooth
and Ethernet modules can be installed at
same time.
• Wi-Fi supports static and dynamic
WEP, WPA, WPA2, EAP-PEAP,
EAP-TTLS, LEAP, EAP-FAST, and
EAP-TLS security protocols
• Bluetooth v2.1+EDR supported
Label Dispenser Module Removes paper backing and presents
labels one at a time for pickup. Includes
Label Taken Sensor.
Cutter Module Provides automatic cutting as labels are
printed. Includes Label Taken Sensor. For
PC43.
Cutter Tray Holds up to 20 labels as they are cut.
Installs on Cutter Module. For PC43.
To Next Page
Loading...
Need help?
General
