EasyManuals Logo

Intermec PC43d User Manual

Intermec PC43d
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Chapter 1 — About the Printers
30 PC23 and PC43 Desktop Printer User Manual
Battery Precautions
Follow these precautions when using the printer with the Battery Base:
Use only the battery supplied by Intermec. Risk of explosion if
battery is replaced by an incorrect type. Use of another battery may
present a risk of fire or explosion.
The battery may present a fire or chemical burn hazard if
mistreated.
Do not disassemble the battery, heat above 100 °C (212 °F), or
incinerate.
Dispose of any used batteries according to the instructions that
came with the battery.
Charge the Battery
When the battery base is connected to AC power, the LEDs indicate the
charging status of the battery.
1 Make sure that the PC43d is properly installed on the base. For
help, see the
PC43d Battery Base Installation Instructions.
2 Connect the power cord from the battery base to the printer.
Battery is 0% to 10% charged.
Battery out of operating temperature
range.
Battery error.
LEDs: Battery Base Not Connected to AC Power (Continued)
LEDs Battery Charge Level

Table of Contents

Other manuals for Intermec PC43d

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec PC43d and is the answer not in the manual?

Intermec PC43d Specifications

General IconGeneral
Print TechnologyDirect Thermal
Print Resolution203 dpi (8 dots/mm)
Max Print Width4.1 inches
Max Print Speed8 ips
ConnectivityUSB, Serial, Ethernet
Media Handlingfanfold
Memory128 MB Flash, 64 MB SDRAM
Media TypeTags
Roll Maximum Outer Diameter5 inches
Core Diameter1 inch (25.4 mm) or 1.5 inches (38.1 mm)
Operating Temperature+5°C to +40°C (+41°F to +104°F)
Storage Temperature-20°C to +60°C (-4°F to +140°F)
Humidity10 to 90% RH non-condensing
Power Requirements100-240V AC, 50-60 Hz

Related product manuals