Chapter 5 — Troubleshoot the Printer
PC23 and PC43 Desktop Printer User Manual 111
you uploaded to the printer will be erased from the printer
memory.
3 To restore all default settings, continue with the next step. You can
also change the settings that are restored as follows:
• To keep the current network settings, clear the Network
settings check box.
• To keep all applications, fonts, and other files you have installed
on the printer, clear the User files check box.
• To keep all current system settings, clear the System Settings
check box.
4 Select and press .
5 To continue, press . The default settings are restored and the
printer restarts. When the printer finishes starting up, the Setup
Wizard begins. Follow the instructions to complete the Wizard.
To return to the Main Menu without restoring any defaults, select
No. To return to the Restore Defaults list without restoring any
defaults, select Cancel.
How to Upgrade the Printer Firmware
You should check for periodic updates to the printer firmware.
Updated firmware can include bug fixes or additional features that you
might find useful. The latest version of the firmware is available from
the PC23 or PC43 printer Downloads page on www.intermec.com.
You can upgrade the printer firmware using:
• the printer web page.
• a USB storage device.
• the USB menu.
• PrintSet 5. For more information, see the PrintSet 5 online help.
Note: After you upgrade the printer firmware, Intermec recommends
that you restore the default settings and calibrate the media sensors.
To Next Page
Loading...
Need help?
General
