Before You Begin
xii PC23 and PC43 Desktop Printer User Manual
• Do not spray the printer with water. If you are using a hose to
clean the premises in an industrial environment, remove the
printer or carefully protect it from spray and moisture.
• You must implement both hardware and software safety
precautions to prevent the possibility of undefined system states.
• You must ensure that dangerous conditions cannot occur under
any circumstances, even for a brief period of time.
• Observe all safety and accident prevention regulations applicable
to your specific region and application.
• Before you use a cleaning card, carefully read the warning text on
the envelope.
• Replace only with same type and rating of fuse to ensure
continued protection against risk of fire.
• If you are using the printer with the Battery Base:
• Risk of explosion if battery is replaced by an incorrect type.
• Use of another battery may present a risk of fire or explosion.
• The battery may present a fire or chemical burn hazard if
mistreated. Do not disassemble the battery, heat above 100 °C
(212 °F), or incinerate.
• Dispose of any used batteries according to the instructions.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec web site at www.intermec.com and click Support >
Returns and Repairs > Warranty.
Note: This equipment may be used on an IT power system.
To Next Page
Loading...
Need help?
General
