Name: Intermec PC43d
Brand: Intermec
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Chapter 2 — Set Up the Printer

62 PC23 and PC43 Desktop Printer User Manual

3 Press to select Tools and then press . The Tools menu appears

with Test Labels selected.

4 Press .

5 Select Print Quality, Printer Information, or Printer Settings,

and then press

. A list of available labels appears.

6 Select a label to print, and then press .

How to Print on RFID Media

If you have an LCD printer with the optional RFID module installed,

you can print on RFID media. Media containing RFID tags is slightly

thicker where the RFID tag is located. The slight thickness of this part

of the label may affect print quality. For thermal transfer labels,

Intermec recommends using high-quality ink ribbon.

To achieve the best possible print quality, follow these guidelines:

• Run the RFID calibration wizard to determine the best Tag

Position and Output Power for RFID media.

• If necessary, modify the Tag Position (TAGADJUST variable) to

make sure the RFID labels are properly aligned with the antenna.

• Avoid printing on the thickest part of the label when possible.

For help configuring RFID parameters, see the Intermec Fingerprint

Command Reference Manual or the IPL Command Reference

Manual.

Test Labels

Print Quality

Resources

Printer Information

Printer Settings

Other manuals for Intermec PC43d

Questions and Answers:

Need help?

Do you have a question about the Intermec PC43d and is the answer not in the manual?

General