Appendix B — Default Settings
PC23 and PC43 Desktop Printer User Manual 141
Display and Audio Settings
This section describes display and audio settings for the printer. To
view these settings:
• From the printer Main Menu, selectSettings > System Settings >
Display.
• From the printer web page, click the Configure tab, System
Settings > Display or Audio.
Reserve Determines if the printer is exclusively
reserved for one Bluetooth device. The
first Bluetooth device that connects
with the printer locks out any other
connection attempts.
Disable
Bluetooth Settings (Continued)
Setting Description Default
Display and Audio Settings
Setting Description Default
Brightness Selects the brightness of the printer screen. Medium
Idle Information Selects the information that appears on the
printer screen when it is in Idle mode.
IPv4 address
Time Format Selects the format used to display time on
the printer.
24 Hour
Date Format Selects the format used to display date on
the printer.
dd/mm/yyyy
Menu Access Determines if the Menu button on the
printer web page is accessible.
Enable
PIN Sets the password that allows access to the
Menu button on the printer web page, if
the Menu Access parameter is set to Enable
With PIN. Range is 4 to 16 characters.
1234
Screen Timeout Selects how long the printer screen stays on
before the screen saver starts.
Disable
Feed Key Access Determines if the Feed button on the
printer keypad is enabled or disabled.
Enable
Volume Sets the printer volume. Off
To Next Page
Loading...
Need help?
General
