Inventec N800G3 - 3.5.3.3. BMC network configuration

04/01/2015 Inventec Corp. Confidential 64
3.5.3.3. BMC network configuration
Aptio Setup Utility –Copyright © 2014 American Megatrends, Inc.
Main Advanced Server Mgmt Recovery Security Boot Save & Exit
BMC network configuration
Lan channel 1 (iLO/Aspeed Dedicated NIC)
Configuration Address source
Current Configuration Address Source
Station IP address
Subnet mask
Station MAC address
Router IP address
Router MAC address
Lan channel 8 (NCSI/Shared NIC)
Configuration Address source
Current Configuration Address Sour
Station IP address
Subnet mask
Station MAC address
Router IP address
Router MAC address
[Unspecified]
DynamicAddressBmcDhcp
00.00.00.00
00.00.00.00
xx-xx-xx-xx-xx-xx
00.00.00.00
00-00-00-00-00-00
[Unspecified]
Unspecified
00.00.00.00
00.00.00.00
xx-xx-xx-xx-xx-xx
00.00.00.00
00-00-00-00-00-00
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1245. Copyright © 2014 American Megatrends, Inc.
Menu Fields
Settings
Comments
Server Mgmt\BMC network configuration
Configuration Address source
[Unspecified]
[Static]
[DynamicBmcDhcp]
[Disabled]
Select to configure LAN channel
parameters statically or dynamically (by
BIOS or BMC). Unspecified option will not
modify any BMC network parameters during
BIOS phase.