Figure 2-7-3 Edit the Parameters
● This page you can check all PoE channels power and connection status.
● EPoE (Extended Power Over Ethernet) extends the usual PoE distance limit of 100M to
an improved 250M. Turning EPoE on allows even greater capacity for installations on
larger sites without expensive additional power infrastructure.
● It is recommended EPoE is only enabled on cameras that are using over 100M of cable
as it can introduce a small video delay introduced for the processing of camera data at
higher distances.
● Select between PoE and EPoE by pressing the ON/OFF button beneath the individual
channels or select beneath ‘All’.
To Next Page