EasyManuals Logo

ISHIDA Uni-3 Technical Manual

ISHIDA Uni-3
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
6 Uni-3 Technical Manual
1.3.4 Set Preset Speed Keys
Use the following steps to set up preset speed keys and function keys.
1. Remove the Speed Key Insert page.
2. Enter 9000 then press Mode.
P00 PROGRAM will display.
3. Press
4 then press the Down Arrow. P04 PRESET KEY will display.
4. Press
Enter. P04-01 0 000 will display.
5. Enter the appropriate Key Flag No. from the list below, then press the PLU key (see Table 2).
6. If the key type requires a specific value such as PLU No. or Tare, enter the number. Otherwise, enter
0.
7. Press desired speed key. The Key Flag No., key position number and key data value are displayed
.
8. Repeat steps 5-7 for all preset speed keys.
9. Press
Mode three times to exit Program Mode. KEY IN ITEM No. will display. Scale is ready to resume
weighing and labeling.
Table 2. Common Key Flag Parameters
To add a new PLU, see Section 5.1, P01-PLU Data.
1.3.5 Set IP Address of the Scale
Use the following steps to set IP address of the scale.
1. Remove Speed Key insert page.
2. Enter
6000 then press Mode. B00 SETUP will display.
3. Enter the password 495344 then press PLU to enter service level.
B00 SETUP will display.
4. Press
1 then press Enter twice. B01-01 BASIC will display.
5. Press the
Right Arrow, then press Enter. B01-02-01 will display.
6. Enter the IP address, then press
Enter. B01-02-01 will display.
Use leading zeros instead of decimals.
Example: enter 192168004025 for 192.168.4.25
7. Press the
Down Arrow. B01-02-02 will display.
8. Enter the Subnet Mask then press
Enter. B01-02-02 will display.
Example: enter 255255255000 for 255.255.255.0
9. Press the
Down Arrow. B01-02-03 will display.
10. Enter the Gateway then press
Enter.
Example: enter 192168004001 for 192.168.4.1
Set the Gateway as 0.0.0.0 if not required.
Key Flag No. Parameter
1PLU
2TARE
3 FIXED PRICE
4 X MULTIPLY
8SAVE
11 COUPON MSG
16 EXTRA MSG 1
17 EXTRA MSG 2
18 EXTRA MSG 3
22 LABEL FORMAT
23 IMAGE 1
24 IMAGE 2
26 PEEL MODE
27 LABEL BATCH
32 UNIT PRICE
Key Flag No. Parameter
33 PACK DATE
34 SELL BY DATE
72 CASE WEIGHT
75 AUTO/MANUAL MODE
137 PRINT QTY
156 LOWER PRESET
162 ENTER FIXED WEIGHT
435 CASSETTE SWITCH
Key Flag No. Parameter
Note
Note

Table of Contents

Other manuals for ISHIDA Uni-3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ISHIDA Uni-3 and is the answer not in the manual?

ISHIDA Uni-3 Specifications

General IconGeneral
BrandISHIDA
ModelUni-3
CategoryScales
LanguageEnglish

Related product manuals