ISHIDA Uni-3 Technical Manual

Installation 21
2.3.1 Harness List
Item
Number
Purposes
1 AC power cord for USA
2 Bench/Pole type power receptacle assy
Hanging type power receptacle assembly
3 AC power to SMPS (power supply)
4 DC+24V to main board
5 L2 Bench type customer side display
L2 Pole type customer side display (main board side)
L2 Pole type customer side display (display side)
L2 Hanging type customer side display
6 L2 Bench/Pole type operator side display
L2 Hanging type operator side display
7 L2 Type backlight resistor assembly
8 Thermal head
9 Stepping motor assy
10 Label sensor assy
11 Bench/Pole type peel sensor
Hanging type peel sensor
12 L1 Bench type customer side display
L1 Pole type customer side display (main board side)
L1 Pole type customer side display (display side)
13 L1 type operator side display
14 Bench/Pole type key
Hanging type key
15 TCP/IP unit
16 USB extension cable
Table 2-4. Harness List

ISHIDA Uni-3 Specifications

General

Brand	ISHIDA
Model	Uni-3
Category	Scales
Language	English