ISHIDA Uni-3 - B26-Country

Setup Mode 57
3.20 B26-Country
Select the language and other settings for correct operation
according to the regulations of each country. By default, B26-01-02
Language is the only step available.
To display
B26-01-01 Country, enter the service password 951753 and press PLU.
To display
B26-01-03 Detail, enter the service password 495344 and press PLU.
From B26-01-03 Detail, press PLU and use the Right arrow key to scroll through B26-02 Currency, B26-03 Weight,
B26-04 Date and B26-05 Data.
From
B26-03 Weight, enter the service password 951753, press PLU and then press Enter to access B26-03-02 Decimal
Point Position, B26-03-03 Decimal Point Type, B26-03-05 Minimal Print Weight, B26-03-06 Zero Width, B26-03-08 Price
Cal. Rate
and B26-03-09 Minimum Print Weight Auto.
From
B26-03 Weight, enter the service password 1478963, press PLU and then press Enter to access B26-03-01 Weight
Unit and B26-03-04 Maximum Tare.
Figure 3-1. B26 Country Menu Navigation
B26 COUNTRY
%&28175<
B26 COUNTRY
ENTER
B26-01-02
Language
951753
+ PLU
B26-01-01
Country
495344
+ PLU
B26-01-03
Detail
PLU
B26-02
Currency
B26-04
Date
B26-05
Data
951753
+ PLU
+Enter
14789632
+ PLU
+Enter
B26-03
Weight
B26-03-02
Dec. Point
Position
B26-03-03
Dec. Point
Type
B26-03-05
Min. Print
Weight
B26-03-06
Zero Width
B26-03-08
Price Cal.
Rate
B26-03-09
Min. Print
Weight Auto
B26-03-01
Weight Unit
B26-03-04
Max. Tare