ISHIDA Uni-3 - Page 63

Setup Mode 59
B26-03
Weight
Gain access by
pressing PLU from
step B26-01-03
and using the right
arrow key to scroll
to B26-03.
B26-03-01 Weight Unit Select weight unit symbol.
This step is only available with service password 14789632.
1: lb
2: kg
3: g
B26-03-02 Dec. Point
Position
Select decimal point position.
This step is only available with service password 951753.
1-5 (3)
B26-03-03 Dec. Point Type Select decimal point type.
This step is only available with service password 951753.
1: ( . )
2: ( , )
B26-03-04 Max. Tare When country is USA and units are lb, the maximum tare
weight is 9.990.
This step is only available with service password 14789632.
--
B26-03-05 Min. Print
Weight
Minimum print weight in manual print mode. “e” represents
one weight division which is 0.005 lb for standard
dual-range weighing.
20e = 0.100 lb, 5e = 0.025 lb,
3e = 0.015lb.
This step is only available with service password 951753.
1: 20e
2: 5e
3: 3e
B26-03-06 Zero Width Fixed at 2.50.
This step is only available with service password 951753.
2.50
B26-03-08 Price Cal. Rate Set the total price multiplier rate. For USA, use 0: x1.
This step is only available with service password 951753.
0: x1
1: x10
2: x100
B26-03-09 Min. WGT Auto Minimum print weight in auto print mode. “e” represents
one weight division which is 0.005 lb for standard
dual-range weighing.
20e = 0.100 lb, 5e = 0.025 lb,
3e = 0.015lb.
This step is only available with service password 951753.
1: 20e
2: 5e
3: 3e
B26-04
Date
Gain access by
pressing PLU from
step B26-01-03
and using the right
arrow key to scroll
to B26-04.
B26-04-01 Date Format Set the date format. Y = Year, M = Month D = Day. 0: Y-M-D
1: M-D-Y
2: D-M-Y
B26-04-02 Year Type Set the number of digits in the year. 1: YY
2: YYYY
B26-04-03 Month Type Set the month format. For the USA, select numeric (0:
DIGIT) or three character abbreviation (1: USA).
0: DIGIT
1: USA
2: CANADA
3: SPAIN
B26-04-04 Date Spacer Select the separator character used in the date. 1: ( , )
2: ( . )
3: ( : )
4: ( / )
5: SPC
7: ( - )
B26-04-05 Shelf Life Specify if the shelf life calculation includes the pack day (2:
TODAY) or begins from the following day (1: NEXT DAY).
1: NEXT DAY
2: TODAY
B26-05
Data
Gain access
by
pressing PLU from
step B26-01-03
and using the right
arrow key to scroll
to B26-05.
B26-05-01 PLU Type PLU data format. Set as 1: Standard for USA. 1: STD
2: TH
3: ZA
Parameter Display Description Choices
Table 3-20. B26 Country Parameters (Continued)