Need help?Do you have a question about the Iskra FPC 200 and is the answer not in the manual?
General| Brand | Iskra |
|---|---|
| Model | FPC 200 |
| Category | Controller |
| Language | English |
Describes the functionality, operation, installation and commissioning instructions for FPC 200.
Identifies the intended audience for this manual, including engineers and personnel.
Details the various safety symbols used on the device and in the technical documentation.
Introduces the FPC 200 numerical protection relay and its main features.
Provides a table to help select the appropriate FPC 200 model based on application.
Describes the modular design of the FPC 200 relay, including its base unit and optional cards.
Explains the general theory of protection functions, including default values and operation ranges.
Details various current-based protection functions like overcurrent and earth fault.
Covers voltage-based protections such as overvoltage and undervoltage functions.
Describes frequency-based protections including overfrequency and underfrequency.
Explains protections related to thermal overload and machine specific functions.
Covers circuit breaker control, monitoring, and diagnostic functions.
Details the function for recording and analyzing disturbance events.
Explains how to access and interpret measured values from the device.
Details Modbus RTU and IEC60870-5-103 communication protocols.
Describes the device's front panel interface, including LCD, LEDs, and keypad.
Presents the hierarchical structure of the device's menu system.
Explains the use of the MiQen software for device configuration and monitoring.
Provides critical safety warnings and guidelines for installation and handling.
Details the physical installation process, including dimensions and service conditions.
Explains the wiring requirements and recommended wire dimensions for connections.
Outlines the procedure for verifying and testing the device before normal operation.
Lists the electromagnetic compatibility and immunity tests performed on the device.
Provides detailed specifications for power supply, current, voltage, and communication interfaces.
To Next Page