Iskra FPC 200 - Safety Instructions

Mounting and commissioning
USER MANUAL FPC 200 - 3/2017 149
5.1 Safety instructions
Safety instruction and warnings should be considered before commencing any work on the device. Dedicated sections for
proper installation, handling and maintenance of the device are provided. Safe operation conditions are achieved by
following provided information and using the device in accordance with its intended function and in the manner specified
in this manual. Failure to observe and follow the instruction in the equipment manual could cause irreversible damage
to the equipment and could lead to property damage, personal injury and/or death.
HAZARD OF ELECTRIC SHOCK, ELECTRIC ARC, BURNS OR EXPLOSION
 Only qualified personnel should install this equipment.
 Work in pairs.
 Wear personal protective equipment.
 Always use a properly rated voltage sensing device to confirm that power is off.
 Carefully inspect the working area for tools and objects that may endanger your work.
 Before performing visual inspections, tests or maintenance on the device disconnect all sources of electric
power. Assume that all circuits are under voltage until they are completely de-energized, tested and tagged.
 Before working on CTs, they must be short-circuited.
 Opening and working on live device is strictly prohibited.
 Equipment ground terminal must be grounded during device operation and service at all times.
 When handling device with optic communication avoid looking directly into the optical heads.
 Hardware replacement can only be done by Iskra d.d. qualified personnel.
5.2 Precautions
It is recommended to follow the instructions given in this document for correct handling, storage and transportation of
FPC 200 device.
Device stored in its original packaging
Transport:
Device can be shipped by all usual means of transport without taking any additional precautions.
Handling:
Device can be handled without any particular care. It can withstand fall from average table height.
Storage:
FPC 200 device stored in original packaging can be stored in appropriate location for several years. Environmental
conditions should be within standardized values:
 Temperature: between -25 °C and +70 °C (between -13 °F and +158 °F)
 Humidity ≤ 90 %
Periodic checking of the environment and the packaging condition is recommended every year.