Mounting and commissioning
150 USER MANUAL FPC 200 - 3/2017
Device installed in a cubicle
Transport:
FPC 200 device can be transported by all usual means of transport in the customary conditions used for cubicles. Storage
conditions should be considered when transportation time is long.
Handling:
In case the device falls out of the cubicle visual inspections of the device is required. If the device shows no signs of
damage it can be energized and tested for operational readiness.
Storage:
The cubicle protection packaging should be kept intact for as long as possible. FPC 200, like all electronic devices, should
be energized as quickly as possible. When this is not possible, the cubicle heating system should be activated.
Working environment
Damp environment:
The temperature and relative humidity factors must be compatible with the environmental withstand characteristics of
the device. Special arrangements should be made when co
mm
issioning the device where environmental values are outside
the specified operation zone. (e.g. air conditioning of premises must be turned on)
Polluted atmosphere
Contaminated industrial atmosphere (e.g. presence of chlorine, hydrofluoric acid, etc.) can cause corrosion of the
electronic components, in which case environmental control arrangements should be made prior to the commissioning.
To Next Page
Loading...