Iskra FPC 200 - Appendix A: Ordering Code

Appendix A: Ordering code
USER MANUAL FPC 200 - 3/2017 173
7 Appendix A: Ordering code
FPC200
F1
-
1
H
1
A
-
A
0
Software type
Feeder protection
F1
Feeder protection with Breaker failure protection
F3
Busbar protection
B2
Busbar protection with ROCOF protection
B3
Motor protection
M1
Motor protection with Restricted Earth Fault
M3
Transformer protection
T1
Transformer protection with Restricted Earth Fault
T3
Housing layout
Small housing ((W) 150 mm, (H) 176 mm, (D) 125 mm) - flush mount
1
Auxiliary supply voltage
High (AC/DC 100 V-250 V)
H
Low (DC 24 V-48 V)
L
AC analog inputs configuration
3CT + 1CTsens. (1 A/5 A*) with fixed connector
1
3CT + 1CTsens. (1 A/5 A*) with removable connector
2
3CT + 1CTsens. (1 A/5 A*) with short circuit connector
3
4VT (60 V-250 V*) with removable connector
4
Digital IO options
6 Outputs
0
10 Inputs (DC 24 V-250 V, AC 230 V) and 8 Outputs
A
Communication
None
0
Modbus RTU (2-wire RS-485 with 3-pin screw connector)
A
Modbus RTU (RS-232 with DB-9 Female connector)
B
Modbus RTU (Fibre Optic with ST connector)
C
Product options
None
0
3 Analog outputs
1
* defined by software setting