Iskra FPC 200 - Supported Standard Options and Functions; Interoperability

Communication
100 USER MANUAL FPC 200 - 3/2017
Supported standard options and functions
This section is direct copy of a standard IEC 60870-5-103 © IEC:1997, 159-171. To represent what options from the
standard are included in communication service.
8 Interoperability
8.1 Physical layer
8.1.1 Electrical interface
X
EIA RS-485
X
Number of loads …32… for one protection equipment.
8.1.2 Electrical interface
X
Glass fibre
Plastic fibre
F-SMA type connector
BFOC/2,5 type connector
8.1.3 Transmission speed
X
9600 bit/s
X
19200 bit/s
(Plus additional settings)
8.2 Link layer
There are no choices for the link layer.
8.3 Application layer
8.3.1 Transmission mode for application data
Mode 1 (least significant octet first), as defined in 4.10 of IEC870-5-4. Is used exclusively in this companion
standard
8.3.2 Common address of ASDU
One common address of ASDU (identical with station address)
More than one common address of ASDU