OPERATING AND MAINTENANCE HANDBOOK
Before moving the machine, make sure that the way is free from
obstacles, holes, bumps, unevenness, obstructions or debris and that
no coverings are there, which can hide holes or other dangers.
Always check the state of pilot lights ; in case they go on, please,
read section “Emergencies”.
Do not move the machine, when the platform is extended, without
having checked that there are not any obstacles even in area where
there is a poor visibility.
While performing traction with lied platform over the working height
of micro SQ1 the safety speed is automatically started.
Traction stopping
Slow: bring gradually joystick 8 back into the starting position, keep-
ing pressed the push buon 10 “Man present”. The braking electronic
control device guarantees a so stopping.
Fast: release switch 10 “Man present”. The braking electronic control
device assures a quick stopping.
IT10122 - IT12122
To Next Page
Loading...
