JRC JLR-7500 - Beacon Information

4-81
4.13 Beacon Information
When the beacon information is set to "ON" based on "4.16.8 Setting Beacon/SBAS", the beacon
information (Type 16 message) from the beacon broadcast stations can be displayed.
Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
1. Press
, , and then .
2. Press
"BEACON INFORMATION", press to select "ON", and press .
3. Press
several times to display the beacon information screen.
· The beacon information is not limited to information obtained from every beacon
broadcast station.
Procedure
Memo