4-16
4.3.7.1 Displaying Route Information
If the cursor is moved onto a route, and left in place for 1 second or longer, the route information
will be displayed.
If the cursor is moved off the route, the route information will be hidden.
The route information displayed consists of the route number and comments.
Only the active route can be displayed.
1. Press
, and display the cursor.
2. Press to move the cursor to the route.
Leave the cursor in place for 1 second or longer, and the route information will be displayed.
4.3.7.2 Editing Route Information
Route comments can be edited. However, shared routes cannot be edited.
Editing is also possible from the menu. Please refer to "4.5.3 Editing Routes".
Only the active route can be displayed.
1. Press
, and display the cursor.
2. Press to move the cursor to the route, and display the route information.
3. Press
to display the edit screen.
4. Press
"COMMENT" and enter the comment.
Please refer to "4.9 Entering Comments" for instructions on how to enter comments.
6. Press
"EDIT FIN".
Procedure
Procedure
Route
Information
Route
Cursor
Route Number
Comment
To Next Page
Loading...
