JRC JLR-7500 - Setting the Click Sound; Setting Reversed Display

4-83
· Set the highest value for "Bright", and the smallest value for "Dark".
· The key brightness setting changes in accordance with the dimmer setting.
4.14.3 Setting the Click Sound
· You can turn the key operation click sound on or off.
ON: The click sound is enabled
OFF: The click sound is disabled
1. Press
, , and then to select "CLICK SOUND".
2. Press to select "ON" or "OFF" and press
.
4.14.4 Setting Reversed Display
· The black/white display can be reversed.
NORMAL: The letters are black. (The background is white)
REVERSE1: The letters are white. (The background is black)
REVERSE2: The letters are white, and the letters on the status bar are black.
1. Press
, , and then to select "REVERSING MODE".
2. Select the reversal mode with , and press
.
Normal Reverse1 Reverse2
Memo
Procedure
Procedure