4-43
8. Enter a comment.
Use the up and down keys to move the cursor to the comment entry field, and press
.
The unit will enter comment entry mode. Enter the comment.
Please refer to "4.9 Entering Comments" for instructions on how to enter comments.
Move the cursor to the comment entry field Comment Entry Mode
9. When you have completed route creation, press
, or to exit the route
information screen.
4.5.3 Editing Routes
· Route waypoint information can be changed, and waypoints can be skipped, added, or deleted.
4.5.3.1 Changing Waypoint Information
1. Refer to "4.5.1 Displaying the Route List", and select the waypoint information you wish to
change.
2. Use the numeric keypad to select the item number you wish to change, and change the
waypoint information.
Please refer to "4.5.1 Displaying the Route List" for details.
Select "7. DETAILS" to set the TURN RATE, turn radius, and time zone. This is only used for
routes shared with ECDIS.
If "SKIP" is selected for "6. STATE", the waypoint will be skipped. Please refer to "4.3.7.3
Skipping Route Waypoints" for details regarding skip operation.
If "DELETE" is selected for "6. STATE", the waypoint will be deleted from the route.
3. To change a comment, move the cursor to the comment field on the LEG information screen
and perform changes.
4. When you have completed route editing, press
, , or to exit the route
information screen.
Procedure
Comment Entry Field
To Next Page
Loading...
