6-19
6.4.2 Junction Box Connection
The junction box rubber gaskets (φ25 Gland side) fit φ 10 - 20 cables.
y How to Mount the Junction Box on a Flat Surface
Securely mount the junction box on a given flat surface using self-tapping screws and flat
washers as shown below.
The self tapping screws and flat washers in the figure above are not included with
this equipment.
y How to Mount the Junction Box on the Mast
Securely mount the junction box on the mast using the pole mounting kit (option:
MPBP30608).
NQE-7700A Junction Bo
To Next Page
Loading...
