4-30
4.4.2 Registering Waypoints
The following 5 positions can be registered in the waypoint list.
(1) Own ship position
(2) Specified latitude and longitude
(3) Cursor position
(4) Position defined by a bearing and distance from a specified point
(5) A position registered in the event/mark list
Up to 10000 points can be registered.
To register, first display the waypoint registration screen.
1. Press
, , and then , and display the waypoint list.
2. Move the cursor to the number you wish to register, and press .
To move the cursor to the desired number, you can use the following methods:
(1) Move with the up and down keys
(2) Enter the desired number with the numeric keypad
(3) Jump to a number without registered contents
Please refer to "4.8.2 Moving the Cursor to an Unregistered Number" for details.
3. The waypoint registration screen will be displayed.
Procedure
Enter latitude and longitude with
numeric keypad and register
Register current own ship position
Register cursor position
Register bearing and distance
Register from event/mark list
Select waypoint position
To Next Page
Loading...
