JRC JLR-7500 - Setting the IP Address

4-117
4.20.8 Setting the IP Address
· The display's IP address, subnet mask, and default gateway can be set. The MAC address can
be displayed.
1. Refer to "4.20 Equipment Configuration" and display the equipment configuration menu.
2. Press
"IP".
(1) IP ADDRESS Configuration
3. Press
"IP ADDR".
4. Press to select "INPUT", and press
.
5. Enter the IP address with the numeric keypad, and press
.
To return the value to the default value, select "DEFAULT" and press
.
(2) SUBNET MASK Configuration
6. Press
"SUBNET MASK".
7. Press to select "INPUT", and press .
8. Enter the subnet mask with the numeric keypad, and press
.
To return the value to the default value, select "DEFAULT" and press
.
(3) DEFAULT GATEWAY Configuration
9. Press
"DEFAULT GATEWAY".
10. Press to select "INPUT", and press
.
11. Enter the default gateway with the numeric keypad, and press
.
To return the value to the default value, select "DEFAULT" and press
.
Procedure