JRC JLR-7500 - Waypoint Symbol Display; Displaying Waypoint Information

4-13
4.3.6 Waypoint Symbol Display
· The symbols and numbers of waypoints registered in the waypoint list are displayed on the plot
screen.
· Up to 1000 waypoints can be displayed on one screen.
· To turn off waypoint symbol display, set "WPT" to "OFF" as described in "4.3.12 Hiding Plot
Screen Symbols".
4.3.6.1 Displaying Waypoint Information
Waypoint information can be displayed by moving the cursor to the waypoint and leaving it in
place for 1 second or longer.
If the cursor is moved off of the waypoint, the waypoint information will be hidden.
The following waypoint information is shown.
· For waypoints on route
Symbol shape, number, comments, latitude, longitude, arrival circle radius, port route width,
starboard route width, bearing from own ship, distance, estimated time of arrival.
· For waypoints off route Symbol shape, number, comments, latitude, longitude
1. Press
, and display the cursor.
2. Press to move the cursor to the waypoint symbol.
Leave the cursor in place for 1 second or longer, and the waypoint information will be
displayed.
Procedure
Cursor
Waypoint
Route
Bearing From Own Ship
Waypoint
information
of waypoints
not on route
Wa
yp
oint Numbe
r
Comment
Waypoint
Position
Port Route Width
Starboard Route Width
Arrival Circle Radius
Planned Speed
Distance From Own Ship
Estimated Time of
Arrival
Waypoint No.
Comment
Waypoint
Position
Symbol
Route Waypoint Information
Symbol