4-5
4.2 Basic Operation
4.2.1 Turning the Unit On
Press the button to turn the unit power on. System initialization will start.
Once initialization has been completed, self-diagnosis will start, and once the equipment's status
has been confirmed, the screen will switch to the standard screen.
If the unit cannot be turned on, check the main power supply and the connection of
display unit cable.
Unit Initialization Self-Diagnosis Screen
(Display Unit Diagnosis)
(Sensor Setting Confirmation)
Press the
key to stop self-diagnosis and return to the standard screen.
4.2.1.1 Startup (Standard)
If the self-diagnosis results are all "OK", the unit automatically switches to the standard screen.
Self-Diagnosis Standard Screen
Attention
Memo
To Next Page
Loading...
