JRC JLR-7500 - Changing Line Types; Own Ship Display; Displaying the Distance Circle; Displaying the Own Ship Vector

4-27
4.3.10.3 Changing Line Types
The line type can be changed.
Line types can be set for each line, but cannot be changed after the line has been set.
1. Press
, , and then , and select "LINE".
2. Press to select the line type, and press .
Line Type List
4.3.11 Own Ship Display
· The distance circle from own ship, and the ship's vector, are displayed.
· The own ship symbol cannot be changed.
4.3.11.1 Displaying the Distance Circle
A circle, centered on own ship, is displayed by specifying the radius.
Settings can be made between 0.1 and 9.9 NM.
1. Press
, , and then , and select "OWN CIRCLE".
2. Press to select "SET", and press .
3. Use the numeric keypad to enter the distance radius [NM], and press
.
4.3.11.2 Displaying the Own Ship Vector
Setting the time allows the vector line to the point own ship will arrive at in the set time to be
displayed.
Settings can be made between 0.1 and 9.9 minutes.
1. Press
, , and then , and select "OWN VECTOR".
2. Press to select "SET", and press
.
3. Use the numeric keypad to enter the time [min], and press
.
Procedure
Procedure
Procedure