4-99
4.20 Equipment Configuration
·
In order to change settings or perform installation configuration, you must switch the unit to
equipment configuration mode.
·
When the unit is in equipment configuration mode, "
" will be displayed at the top left of
the title bar.
1. Press and hold
and for 3 seconds, and " " will appear at the top left of
the title bar, indicating that the unit is now in equipment configuration mode.
"0. EQUIP SET" will appear on the main menu screen. Press
to display the
equipment configuration menu.
Press and hold
and (3 seconds)
or
·
Pressing
or on the equipment configuration menu will return to the main
menu.
·
Equipment configuration mode will end when one of the following occurs:
- when
is pressed again on the main menu screen.
- when the power is turned off
· When making settings, check that the unit is in equipment configuration mode.
Memo
Procedure
equipment configuration menu
To Next Page
Loading...
