JRC JLR-7500 - Adding Route Waypoints

4-44
4.5.3.2 Adding Route Waypoints
Waypoints can be added at any position along routes.
1. Please refer to "4.5.1 Displaying the Route List", select the route to which you wish to add a
waypoint, and display the LEG information.
LEG Information Screen
2. Move the cursor to the position where you wish to perform addition.
Ex 1) To add a waypoint between 3 and 4, move the cursor to waypoint 4.
Ex 2) To add a waypoint before 1, move the cursor to waypoint 1.
Ex 3) To add a waypoint after the final waypoint, move the cursor past the final waypoint.
Refer to "4.8.1 Moving the Cursor within a List" for details regarding cursor movement.
To make an addition, press
after the final waypoint.
To make an addition between waypoints, or before the first waypoint, press and hold
and
.
The waypoint list will be displayed.
Ex 1) Adding a waypoint between 3 and 4
Procedure
Move cursor to fourth waypoint
Waypoint List