4-64
4.8.1.2 Using the Numeric Keypad to Enter a Number and Move the Cursor
The operation examples show selection of waypoint 5 in the waypoint list, but the instructions
provided apply to operation within all lists.
1. Display the list.
2. Enter the destination number "5" with the numeric keypad, and press
.
The cursor moves to number 5.
· In the list that displays only the registered number, when the input number with
numeric keypad doesn't exist, the cursor moves to a number that is the nearest the
input number.
4.8.2 Moving the Cursor to an Unregistered Number
· The cursor can be moved within a list in the following ways:
(1) The cursor can be moved via the up and down keys
(2) You can jump to an unregistered number.
(3) The cursor can be moved by entering a number with the numeric keypad
· This is used when registering waypoints, selecting copy destinations for waypoints, creating
routes, and selecting copy destinations for routes.
4.8.2.1 Moving the Cursor with the Directional Keys
1. Display the list.
2. Press to move the cursor.
Keys
Waypoint List The cursor moves
Press to move the cursor to the next page.
The number entered with the
numeric keypad is displayed
Enter move destination, "5", with
numeric keypad
Cursor moves to number entered, "5"
Procedure
Procedure
Memo
To Next Page
Loading...
