All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic s.r.l.
‘STATUS’ from the main menu and then following the top menu ‘Connectors’ can be
found.
• To check the software version running the charging station, you can navigate to
‘STATUS’ from the main menu and then following the top menu ‘Software Version’
can be found.
Links for Parameterization category:
• To edit the boot.ini options, you can navigate to ‘OCPP’ from the main menu and
then following the top menu ‘BOOT’ can be found.
• To edit the OCPP configuration, you can navigate to ‘OCPP’ from the main menu.
• To edit the Ethernet IP address, you can navigate to ‘NETWORK’ from the main
menu and then following the top menu ‘Ethernet Configuration’ can be found.
• To edit the SIM configuration, you can navigate to ‘NETWORK’ from the main menu
and then following the top menu ‘SIM’ and following the submenu ‘APN
Configuration’ can be found.
• To edit the SIM network configuration, you can navigate to ‘NETWORK’ from the
main menu and the following the top menu ‘SIM’ and following the submenu ‘Network
Configuration’ can be found.
• To edit the OpenVPN configuration click on ‘NETWORK’ from the main menu and
following the top menu ‘OpenVPN’ can be found.
• To edit the NFC tags in the charging station’s whitelist, you can navigate to
‘GENERAL’ from the main menu and then following the top menu ‘WhiteList NFC’
can be found.
• To edit the Max Power drain for the mains power supply, you can navigate to
‘GENERAL’ from the main menu and then following the top menu ‘Max Power’ can
be found.
• To edit the GUI visibility options, you can navigate to ‘GENERAL’ from the main menu
and then following the top menu ‘GUI’ can be found.
To download the Charging Station’s manual, you can navigate to ‘GENERAL’ from the main
menu and then following the top menu ‘Manual’ can be found.
‘PASS’ is found on the main menu, it is used to change the username and password for this
web interface.
‘RESET’ is found on the main menu, it is used to perform soft and hard resets on the charging
station.
To Next Page
Loading...
