All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic s.r.l.
5.3. Parameterization
BOOT
The menu boot is used to set up the main running parameters for the charging station. They
are required to be inserted manually. Click ‘Save Configuration’ when all parameters are
typed.
Location:
Click on ‘OCPP’ from the main menu and following the top menu click on ‘BOOT’.
Figure 41 is an example of the webpage, please not that not all options are editable. When
some has been edited from the original configuration, it is marked with a light-blue
background.
Figure 41: Example of BOOT Configuration webpage
To Next Page
Loading...
