Juniper EX2300 Series - Page 201

Table 42: Health Status (Connued)
Field Descripon
Temp. Indicates the chassis temperature status. Temperatures are listed in Celsius and the corresponding
Fahrenheit values.
NOTE: The Temp eld is unavailable for a standalone EX2200-C switch.
The Temp eld is dynamically available for an EX2200 Virtual Chassis switch based on the model
of the member clicked.
NOTE: In EX4300 Virtual Chassis, the temperature of the primary Roung Engine is displayed by
default. To display the temperature of the Roung Engine of any switch, click the image of that
switch.
In EX4600 Virtual Chassis, to display the temperature of the Roung Engine of each switch,
mouse over the green-colored indicator.
CPU load Indicates the average CPU usage over 15 minutes. In a Virtual Chassis conguraon, on loading
the primary or backup switch, the CPU load for that switch's Roung Engine is displayed by
default. To display the CPU load for a specic switch's Roung Engine, click the image of that
switch.
Fan status Indicates the status of the fans in the fan tray. The possible values are OK, Failed, and Absent. In a
Virtual Chassis conguraon, the fan status of the primary switch is displayed by default. To
display the fan status for any switch , click the image of that switch.
NOTE: The Fan status eld is unavailable for a standalone EX2200-C switch.
The Fan status eld is dynamically available for an EX2200 Virtual Chassis switch based on the
model of the member clicked.
In EX4600 Virtual Chassis, mouse over the fan icon to display the fan status of all the switches.
EX4500 and EX4550 Switches
Memory ul. Indicates the memory used in the Roung Engine. In a Virtual Chassis conguraon, the memory
ulizaon value of the primary Roung Engine is displayed.
Flash Indicates the usage and capacity of internal ash memory and any external USB ash drive.
192