Juniper QFX5110 User Manual

CHAPTER 10
Connecting the Switch to Power
•
Connecting Earth Ground to a QFX5110 on page 84
•
Connecting AC Power to a QFX5110 on page 85
•
Connecting DC Power to a QFX5110 on page 87
83Copyright © 2017, Juniper Networks, Inc.

Juniper QFX5110 Specifications

General

Model	QFX5110
Power Supply	Dual, hot-swappable
Rack Units	1U
Operating Relative Humidity	5% to 90% non-condensing
Input Voltage	100-240 VAC
Operating System	Junos OS
Layer Support	Layer 2 and Layer 3
Virtual Chassis Support	Yes
Ports	48 x 10GbE SFP+
Jumbo Frames	9216 bytes
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Altitude	Up to 3, 048 m
Management	CLI
AC Input Frequency	50/60 Hz
Storage Temperature	-40°C to 70°C
MTBF	Consult Juniper documentation for specific values.