Juniper QFX5110 - Figure 38: All QFX5110 VCF

Figure 38 on page 97 shows cabling for a QFX5110 VCF with two QFX5110-32Q spine
devices connected to four QFX5110-48S as leaf devices, all using all QSFP28 ports as
VCPs.Figure 39 on page 98 shows the cabling for a QFX5110 VCF using QFX5110-32Q as
spines and QFX5100-24Q leaf devices.
Figure 38: All QFX5110 VCF
g050760
97Copyright © 2017, Juniper Networks, Inc.
Chapter 11: Connecting the Switch to the Network