Juniper QFX5110 User Manual

CHAPTER 22
Installation Safety Guidelines and
Warnings
•
Installation Instructions Warning on page 161
•
QFX5110 Chassis Lifting Guidelines on page 162
•
Restricted Access Warning on page 162
•
Ramp Warning on page 164
•
Rack-Mounting and Cabinet-Mounting Warnings on page 164
•
Grounded Equipment Warning on page 168
Installation Instructions Warning
WARNING: Read the installation instructions before you connect the device
to a power source.
Waarschuwing Raadpleegde installatie-aanwijzingenvoordat u hetsysteem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmänyhdistämistä virtalähteeseen.
Attention Avant de brancher lesystème sur la source d'alimentation,consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare leistruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
161Copyright © 2017, Juniper Networks, Inc.

Juniper QFX5110 Specifications

General

Model	QFX5110
Power Supply	Dual, hot-swappable
Rack Units	1U
Operating Relative Humidity	5% to 90% non-condensing
Input Voltage	100-240 VAC
Operating System	Junos OS
Layer Support	Layer 2 and Layer 3
Virtual Chassis Support	Yes
Ports	48 x 10GbE SFP+
Jumbo Frames	9216 bytes
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Altitude	Up to 3, 048 m
Management	CLI
AC Input Frequency	50/60 Hz
Storage Temperature	-40°C to 70°C
MTBF	Consult Juniper documentation for specific values.