Juniper QFX5110 - QFX5110 AC Power Cord Specifications; Table 25: AC Power Cord Specifications

QFX5110 AC Power Cord Specifications
Detachable AC power cords are shipped with the chassis, if you include them as part of
your order. The coupler is type C13 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet
(approximately 4.5meters) in length,to comply with NationalElectrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the QFX
Series switches are in compliance.
Table 25 on page 58 lists AC power cord specifications provided for each country or
region.
Table 25: AC Power Cord Specifications
GraphicJuniper Model NumberPlug StandardsElectrical SpecificationsCountry/Region
CG_CBL-C13-06-AUIEC 60884-1250 VAC, 10 A, 50 HzAustralia
CG_CBL-C13-06-CHGB 2099.1–2008250 VAC, 10 A, 50 HzChina
CG_CBL-C13-06-EUIEC 60884-1250 VAC, 10 A, 50 HzEurope (except Italy,
Switzerland, and United
Kingdom)
CG_CBL-C13-06-ITCEI.23-16/VII250 VAC, 10 A, 50 HzItaly
CG_CBL-C13-06-JPJIS C8303125 VAC, 12 A, 50 Hz or 60 HzJapan
g021274
CG_CBL-C13-06-USNEMA 5-ISP125 VAC, 13 A, 60 HzNorth America
CG_CBL-C13-06-KRKSC 8305250 VAC, 10 A, 60 HzSouth Korea
CG_CBL-C13-06-SZSEV 1011–2009250 VAC, 10 A, 50 HzSwitzerland
CG_CBL-C13-06--UKBS 1363250 VAC, 10 A, 50 HzUnited Kingdom
Related
Documentation
QFX5110 AC Power Supply on page 33•
Copyright © 2017, Juniper Networks, Inc.58
QFX5110 Switch Hardware Guide