Juniper QFX5110 User Manual

Figure 53: Location of the AC Power Supply Serial Number ID Label on a
QFX5110
1— AC power supply serial number
•
Fan module—The serial number ID label is on the bottom of the fan bezel. See
Figure 54 on page 132 for an example of where to find the serial number ID.
Figure 54: Location of the Fan Module Serial Number ID Label on a
QFX5110-48S
1— Fan module serial number
Related
Documentation
Returning a QFX5110 or Component for Repair or Replacement on page 129•
Contacting Customer Support to Obtain Return Material Authorization
If you are returning a device or hardware component to Juniper Networks for repair or
replacement, obtain a Return MaterialAuthorization(RMA) number from Juniper Networks
Technical Assistance Center (JTAC).
After locating the serial number of the device or hardware component you want to return,
open a Case with Juniper Networks Technical Assistance Center (JTAC) on the Web or
by telephone.
Copyright © 2017, Juniper Networks, Inc.132
QFX5110 Switch Hardware Guide

Juniper QFX5110 Specifications

General

Model	QFX5110
Power Supply	Dual, hot-swappable
Rack Units	1U
Operating Relative Humidity	5% to 90% non-condensing
Input Voltage	100-240 VAC
Operating System	Junos OS
Layer Support	Layer 2 and Layer 3
Virtual Chassis Support	Yes
Ports	48 x 10GbE SFP+
Jumbo Frames	9216 bytes
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Altitude	Up to 3, 048 m
Management	CLI
AC Input Frequency	50/60 Hz
Storage Temperature	-40°C to 70°C
MTBF	Consult Juniper documentation for specific values.