Juniper QFX5110 - QFX5110 AC Power Supply LEDs

Table 7: QFX5110-48 Access Port and Uplink LED Locations
LocationIndicatorsPort TypeModel
g050236
Bi-colored LEDs
Link and Activity
Status
QSFP28QFX5110-48S
Link and Activity
Status
SFP+
Table 8: QFX5110-32Q Access Port and Uplink LED Locations
g050236
Bi-colored LEDs
Link and Activity
Status
QSFP28 and
QSFP+
QFX5110-32Q
As shown in Table 7 on page 17, there are four bi-color LEDs for each QSFP+ access port.
The first LED indicates link presence and activity, while the remaining LEDs indicate status.
Table 9 on page 17 describes how to interpret the Link/Activity QSFP28 port LEDs,
counting from the left-most position.
Table 9: Network Port LEDs on QSFP28 Ports on a QFX5110
DescriptionStateColorPosition
The port is administratively disabled, there is no power, the link is
down, or there is a fault.
OffUnlit1–4
17Copyright © 2017, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions