To pack and ship QFX5110 components:
1. Place individual FRUs in antistatic bags.
2. Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
3. Close the top of the cardboard shipping box and seal it with packing tape.
4. Write the RMA number on the exterior of the box to ensure proper tracking.
Related
Documentation
• Returning a QFX5110 or Component for Repair or Replacement on page 129
135Copyright © 2017, Juniper Networks, Inc.
Chapter 17: Contacting Customer Support and Returning the Chassis or Components
To Next Page
Loading...
