Table 35: Chassis Alarm Messages (continued)
Recommended ActionCLI MessageAlarm TypeComponent
Check whether a cable is connected to
the management Ethernet interface, or
whether the cable is defective. Replace
the cable, if required.
If you are unable to resolve the problem,
open a support case by using the Case
Manager link at
http://www.juniper.net/support/ or
call 1-888-314-5822 (tollfree, US or
1-408-745-9500 (from outside the
United States).
Management Ethernet 1 Link DownMajor (red)Management
Ethernet interface
Related
Documentation
• Chassis Status LEDs on a QFX5100 Device
• QFX5110 Chassis Status LEDs on page 21
• QFX5200 Chassis Status LEDs
• Configuring the Junos OS to Determine Conditions That Trigger Alarms on Different
Interface Types
• alarm
Copyright © 2017, Juniper Networks, Inc.150
QFX5110 Switch Hardware Guide
To Next Page
Loading...
