Kavo 3D eXam ® Operators’ Manual
K990400 16 April 2008
6-6
Operation Guidelines:
• A site review should have been performed by a qualified
physicist prior to system installation to ensure proper
equipment layout for safe operation of the system.
• If any changes are made to the equipment layout or
occupancy of adjacent areas, or if there is a significant
increase in patient workload after the original review, re-
evaluation should be performed by a qualified physicist.
• Refer to the Radiation Environment Survey chapter for
specific scatter beam measurements for your system.
1. Click the Preview button under Exposure.
The following dialog box is displayed.
2. Click OK to continue.
3. Press the Scan button on the Control Box when prompted to
proceed with the Static Exposure.
To Next Page
Loading...