KEEWAY F-ACT EVO - Crankcase Details; 16. Crankcase; 16.2 Fault Analysis

- 149 -
Examination and Maintenance of the Exhaust Gas Emission System Silencer
1.Graphite Winding Gasket 2. Exhaust Pipe Assembly 3. Socket Head Cap Screws M6×25 4.Broken Bolt
M6×25 5. Bolt M6×16 6. Connected Flange Gasket Assembly 7. Cushion Ring 6 8.Spring Cushion Ring 6
9. Nut M6 10. Bolt M8×20 11. Muffler Tube Assembly 12. Cap Nut 13.Cushion Ring 6 14.Gland 15.
Silencer Anchor Ear 16.Gasket 17.Shell Assembly 18. Plate Bar Clasp 19.3 19. Check Valve And Silencer
Connection Pipe 20. Check Valve 21. Bolt M6×35 22. Oil Pipe 13×18×50 23. Plate Bar Clasp 17.5 24.Small
Strainer 25.Rubber PipeⅡ
A
The torque force value of set
bolt 13 in the joint of
silencer in the picture is 5-9
N·m
B
The torque force value of set
bolt 6 in the joint of silencer
in the picture is 22-29 N·m
C
The torque force value of set
bolt 12 in the joint of
silencer decoration
component in the picture：
5-9 N·m