4.5.3.2 Installation
Install the bulb in the opposite order of removal.
4.6 Meters
Remove the rearview mirrors.
Remove set screws on the deckboards.
Take off the upper deckboard.
Take off milometer components.
Take off the meters.
Install the meters in the opposite order of removal.
4.7 Power Lock
4.7.1 Inspection
Take off the front shield.
Take off pedal boards.
Remove the main switch conductor joints.
Conduction inspection of the joint terminals.
4.7.2 Power Lock Replacement
Take off the front shield.
Take off pedal boards.
Remove the set screws and take off the power lock.
Install the set screws and replace a new power lock.
To Next Page
Loading...
Need help?
General
