Install the oil level gauge.
* Note
Confirm whether the bolts wear or not.
Gear oil replacement
Remove the gear oil to check bolt
Remove the oil bolt, make the gear oil flow out
Fix the oil bolt.
* Note:
Confirm whether the bolts wear or not.
Supplement gear oil,
Check if there is leaking oil
Install gear oil to check bolt
Drive belt
Remove the cover of left crank case.
Check whether the drive belt is work or damaged.
Periodically maintenance shall be guaranteed, and replace the
drive belt with a new one if necessary.
驱动皮带：drive belt
Free path of front/rear brake
Free path of front brake
Measure the free path of front brake at the point of the brake
lever.
Free path: 10-20mm
To Next Page
Loading...
Need help?
General
